Happymodel Moblite7 Ultra Light 1S 75mm Brushless Whoop FrSky

1.409kr

Availability: Only 1 left in stock SKU: 284544, Barcode: 5A10016 Categories: ,

Description

Notes: Moblite7 original battery would Change to be Happymodel Brand from April 14th 2021.
2.4GHz receiver antenna length change to 5cm since Nov.15th 2021.

The Moblite7 is inspire from “Mr Shutterbug” , thanks him for the great custom build idea.

Specifications:
Brand Name: Happymodel
Item Name: Moblite7 1S 75mm ultra light brushless whoop
Wheelbase: 75mm
Size: 97mm*97mm*25mm
Weight: 19.5g (without battery)
Weight:36g(with Original 1s 650mah Lipo battery )
Max takeoff weight:55 gram

Features:
The lightest 1s 75mm brushless whoop
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors
Low profile Canopy design
VTX power switchable 25mw~200mw

Package includes:

Item NameQty
75mm Frame1
Option1: DiamondF4 FR built-in SPI Frsky receiver1
Option2: DiamondF4 FS built-in SPI Flysky receiver
EX0802 KV19000 Unibell brushless motor4
HQPROP 40MMX2 propeller(4cw+4ccw)1
Runcam Nano31
Built-in 5.8G 40ch 25mw-200mw VTX1
1s 650mah Lipo battery2
Propeller disassemble tool1
Screwdriver1
Happymodel Carry case1

Spare parts specifications:

MotorMode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only
Flight controller(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM42688P Gyro (SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Onboard 4in1 ESCMCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver VersionSPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver VersionSPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
Failsafe support
Onboard 5.8g VTXOutput power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels(include Race band)Smartaudio ready
Runcam Nano3Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo BatteryCapacity:650mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g
Connector: PH2.0

Additional information

Weight255 g
Dimensions19 × 17 × 7 cm
Brand

Happymodel

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.