Happymodel Mobula6 2.4GHz ELRS Standard Version 19000kv

1.309kr

Availability: Out of stock SKU: 718275 Categories: ,

Email when stock available

Description

(Pre-installed ELRS V2.0)

 

ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are happy to sell one of the most popular tiny whoops (Mobula6) in ELRS form. The new Mobula6 ELRS also includes new SE 0802 brushless motor, one of the lightest brushless motors in the world. Make the Mobula6 your go to whoop drone this Tiny Whoop Season.

Key Features

  • AIO Flight controller with ELRS Receiver and 5.8G VTX
  • Super light 1S 65mm Brushless whoop only 18.7g
  • Equipment with the SE 0802 brushless motors
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV

Specification

  • Brand: Happymodel
  • Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 18.7g
  • Voltage:1S
Version2.4GHz ELRS915MHz ELRS868MHz ELRS
ColorGreenBlueBlue
Flight controllerELRS F4 2G4CrazyF4 ELRSCrazyF4 ELRS
Firmware targetCRAZYBEEF4SX1280CRAZYBEEF4DXCRAZYBEEF4DX
Built-in ExpressLRS receiverSPI 2.4GHzSerial-base 915MHzSerial-base 868MHz
Built-in Dshot ESC5A5A5A
Receiver antenna plugSMD ceramic antennaIPEX MHF3IPEX MHF3
Onboard VTX power25mw~200mw25mw~200mw25mw~200mw
Brushless MotorSE 0802 KV19000SE 0802 KV19000SE 0802 KV19000
PropellerHQPROP 31mm Bi-bladeHQPROP 31mm Bi-bladeHQPROP 31mm Bi-blade
Battery1s 300mah Lipo battery1s 300mah Lipo battery1s 300mah Lipo battery

Detailed Component Specifications

MotorMode: SE 0802 KV19000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only
PropellersHQprop31mmx2
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.2g
Flight controllerELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in ExpressLRS 2.4G/915MHz/868MHz receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESCMCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver (Optional)Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna
Telemetry output Power: <12dBmReceiver protocol:  SPI ExpressLRS
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible
Onboard Serial-based ELRS Receiver ( Optional)Operation current: ~100Ma
Rx To FC protocol: CSRF
RF Frequency optional: 915mhz or 868mhz(EU)
Antenna connector:  IPEX4
Telemetry output Power: <17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF
Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware)
Firmware flash via Betaflight pass-through
Onboard 5.8g VTXOutput power: 25mw~200mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready
Runcam Nano3Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo BatteryCapacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8gConnector: PH2.0

Included

  • 1x Mobula6 1S FPV Racing Drone
  • 4x 1S 300mAh 30C Lipo Battery
  • 1x 1S Lipo/LIHV USB Charger
  • 1x Propeller disassemble Tool

Additional information

Weight110 g
Brand

ExpressLRS, Happymodel

2 reviews for Happymodel Mobula6 2.4GHz ELRS Standard Version 19000kv

  1. 5 out of 5

    Anonymous (verified owner)

    Verified reviewVerified review - view originalExternal link

    Roligaste jäkeln ever

  2. 4 out of 5

    Emil (verified owner)

    Verified reviewVerified review - view originalExternal link


Only logged in customers who have purchased this product may leave a review.