Matek F722 Mini SE Flight Controller

569kr

The Matek F722 Mini SE features an MPU6000 gyro, Black Box memory, VTX control and dual camera input.

Availability: Out of stock SKU: MATF110 Categories: , ,

Email when stock available

Description

Overview:

The Matek F722 Mini SE is the latest 20x20mm flight controller from Matek, but also comes with a 30.5mm mounting board so can be used on full sized quads too.

The Matek F722 Mini features an MPU6000 gyro, Black Box memory, VTX true on/off filtered power switching and dual camera inputs (switchable). The flight controller also supports both Betaflight & INAV firmware.

Features:

– MCU: 216MHz STM32F722RET6
– IMU: MPU6000 (SPI)
– OSD: AT7456E (SPI)
– Baro: Infineon DPS310 (I2C)
– Blackbox: 32M-byte Flash memory (SPI)
– 5x Uarts (1,2,3,4,6) with build-in inversion
– 1x Softserial supported
– 8x Dshot/Proshot/oneshot outputs
– 1x I2C
– 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
– 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
– Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
– Dual Camera image switchable via AUX (modes tab-user2)
– Convertible 20mm to 30.5mm mounting
– Camera control: Yes
– Smartaudio & Tramp VTX protocol: Yes
– DJI OSD: Yes (any spare Uart Tx & Rx)
– WS2812 Led Strip : Yes
– Beeper : Yes
– RSSI: Yes
– Additional ADC for INAV analog airspeed

FC Firmware
– INAV target: MATEKF722mini
– BetaFlight unified target: MATEKF722mini(MTKS)
– BetaFlight legacy target: MATEKF722SE

PDB
– Input: 6~36V (2~8S LiPo)
– BEC: 5V 2A
– LDO 3.3V: Max.200mA
– Battery Voltage Sensor: 1:10 (Scale 110)
– No Current Sensor built-in, supports external current sensor of PDB/4in1

Physical
– 20 x 20mm/Φ3mm with Silicon Grommets
– 20 x 20mm/Φ2mm with Silicon & Brass Grommets
– 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
– Dimensions: 28 x 28 mm
– Weight: 5g

Included:
– 1x FC F722-miniSE
– 1x 20mm to 30.5mm conversion plate
– 6x Silicon grommets M4 to M3
– 6x Brass grommets M3 to M2
– 1x SH1.0_8pin cable 5cm
– 2x SH1.0_8pin connectors

Additional information

Weight13 g
Dimensions12 × 8,3 × 1 cm
Brand

Matek

2 reviews for Matek F722 Mini SE Flight Controller

  1. 4 out of 5

    Tomi J. (verified owner)

    Verified reviewVerified review - view originalExternal link

    Lots of uarts, sda/scl for compass, 2x 4v5 from USB-port for ex. for Rx and GPS, baro onboard, plan to use with iNav, seems ok,

  2. 5 out of 5

    Anonymous (verified owner)

    Verified reviewVerified review - view originalExternal link


Only logged in customers who have purchased this product may leave a review.